Small problem ...

[Kunundrum]

Today I noticed that my ground was off the block so I desided to put it back on.

Now when I did this I accidently snaped off the bolt that holds the exaust side valvecover

should I worry about this ? now I have the ground anchored to the camgear cover bolt.

if I should worry where would I go to get it fixed ?

------------------
*****
1990 Civic H/B *wrecked & being parted out*
*****
ZC Powered 90 CRX SI With Mods
I/H/C/E
+

-----------
planned
-----------
- Rims (15")
- Turbo

[This message has been edited by Kunundrum (edited March 06, 2002).]

[mel_and_his_rex]

what part snapped off? just the lil screw on top or the bottom half into the head? if its the top then you can just get a new one and replace it if its the bottom you need to go get it drilled out then replaced...

------------------
89 CRX Si
and a 89 CRX Dx(winter beater)

[IAIA]

I have the same Spark Plug Wires, supposing those are NGKs.

------------------
www.fourthgenhatch.com

[habib_88]

I broke one of those on my DX one time...those bolts just screw into the head. My friend had a spare head we took a bolt outta it, took my valve cover off, unscrewed the old one and screwed in the new one it was easy. I dunno what bolts work with your ZC head you'd have to look around.

------------------
MILF and cookies...

Suspenion Mods- Hmmm http://www.progressauto.com I want their springs
Brake mods- you can never have enough
Engine mods- Send money...must...go...faster

[Kunundrum]

Yup NGK Wire

looks like I will need to have it re-drilled.

I'll do that when i get the valve cover polished.

------------------
*****
1990 Civic H/B *wrecked & being parted out*
*****
ZC Powered 90 CRX SI With Mods
I/H/C/E
+

-----------
planned
-----------
- Rims (15")
- Turbo

[gotatight92si]

no, don't worry about it unless you want to get the head off. my 92 had ALL of the heads broken off..i had to drill and retap all of them. it was a major pain in the butt. it seems that honda does that a lot..my 90 had two of them broken off and my 91 has 1 broken off. but no, don't worry about it unless you need to get the valve cover off...it doesn't harm anything.

------------------

[sastanley]

91zc has some he is sending to me cuz some got broken when he was inspecting the the motor before he ripped it out for the b16...He prolly remembers where he bought them...I bet 89 Integra ones will work, but I dunno for sure.
Oh yeah - hey John! Don't forget to e-mail me and tell me how to much to ship those things to me..or maybe I should just paypal you $5 ? lol - that should cover it. I hope to put the motor back together in a week or so...ordering parts this weekend - yippee!!!

------------------
-Shawn
91 DX 4-door
AEM CAI & other mods which only add weight
Coming soon:
ZDyne controlled ZC
Si tranny w/ ACT clutch

[91zc]

Yea, i picked them up at the local dealer and they are from an 89 integra. Thanks for reminding me shawn...hehehe. I almost forgot about them. I will let you know when I mail them.

------------------
1991 Civic 4dr
B16A
a bunch of other mods
------------------------
AIM-jbprader

[sastanley]

yea dude...totally understandable...

Who wants to remember mail off a few dumb bolts and nuts for their old ZC when they have their mind totally pre-occupied with their new b16 !

------------------
-Shawn
91 DX 4-door
AEM CAI & other mods which only add weight
Coming soon:
ZDyne controlled ZC
Si tranny w/ ACT clutch

[91zc]

Anyway how is it going with the whole thing?? Any major problems?? I will have to go look through all my stuff and find them. I have so much stuff laying around and I haven't really cleaned it up or organized it so it might be an adventure...hehehehe

------------------
1991 Civic 4dr
B16A
a bunch of other mods
------------------------
AIM-jbprader